Flashing your NSA310 with Debian Squeeze to run Sabnzbd, Sickbeard & CouchPotato - Part 4

This one has been in my drafts forever, I thought I would take the time to post it in-case anyone followed parts 1-3.
If you missed parts 1-3 of this post here they are:

Part 1
Part 2
Part 3

Otherwise lets get started!

OK, at the end of part 3 I asked you to make a note of the MAC address assigned to eth1, providing you have it then SSH to your NSA310 and login, then type

pico /etc/rc.local

then edit your file to look exactly like mine below:

Once you have edited the file, press Ctrl+O to write it out, Ctrl+X to exit.
This statement will fix the brightness of your LEDS. Now to set your MAC address to what it should be (instead of 00:00:00:00:00:00)

type pico /etc/network/interfaces and edit your file to look like mine (changing the MAC to your own)

save and exit

now to edit sysctl.conf, type:

pico /etc/sysctl.conf and add these lines:

# Set VM min memory
vm.min_free_kbytes=8192

save and exit

Now for one last edit:

pico /default/rcs, delete the entire contents and type/paste

:

#
# /etc/default/rcS
#
# Default settings for the scripts in /etc/rcS.d/
#
# For information about these variables see the rcS(5) manual page.
#
# This file belongs to the "initscripts" package.

# delete files in /tmp during boot older than x days.
# '0' means always, -1 or 'infinite' disables the feature
TMPTIME=0

# spawn sulogin during boot, continue normal boot if not used in 30 seconds
SULOGIN=no

# do not allow users to log in until the boot has completed
DELAYLOGIN=no

# assume that the BIOS clock is set to UTC time (recommended)
UTC=yes

# be more verbose during the boot process
VERBOSE=no

# automatically repair filesystems with inconsistencies during boot
FSCKFIX=no

# mount /run/lock as a tmpfs (separately from /run)
RAMLOCK=no

# mount /run/shm as a tmpfs (separately from /run)
RAMSHM=no

# mount /tmp as a tmpfs
RAMTMP=no

again save and exit

That’s the hardware setup and ready for action now we can install Sab, CP & Sickbeard.

**NOTE** If I get time I will post these steps up, but for now Parts 1-4 are a good place for anyone to start with this